• Suitable for fresh and salt water
• Designed for neat, through-floor mount
• Plunger locks down flush with the floor when not in use
• Comfortable for bare foot use
• Easy, smooth action

• Product Code:	Hose Connection:	Weight:	Materials:	Service Kit:	Maximum Priming Height:	Maximum Output per minute:
  GP1309	13 mm (½")	369 g (13 oz)	Acetal copolymer, Nylon, Polypropylene. NeopreneTM& Nitrile, Stainless Steel	AK1304 Service kit for Tiptoe MK.3 & MK.4 models	2 m (7 ft)	7 ltrs          (2 US gals)

  
  
  

• Pumps fresh and salt water
• Foot operated water pump
• Self primes and operates dry without damage
• Smooth double action
• 15 ltrs (4 US gals) per minute
• Multi-directional inlet and outlet hose connections 
• 3 mounting options (including thru bulkhead)
• Left and right handed versions available
• Easy, smooth hands free operation
• Can be used to prime Whale In-Line Booster pumps

• Product Code:	Hose Connections:	Weight:	Materials:	Service Kit:	Maximum Priming  Height:	Maximum Output per Minute:
  GP0550	Suitable for Quick Connect 15 mm + ½” Flexible hose	675 g (23¾ oz)	Acetal copolymer, Nylon, NeopreneTM & Nitrile, stainless steel	AK0553 Service kit suitable for Mk3 only	2 m (7 ft)	15 ltrs   (4

Flow rate: 16.3 Litres/min (4.3 gallons/min)
Self-priming from dry up to 2.4m (7.8ft)

• Smooth flow
• Dry running capability
• Soft noise absorbing mounts
• Snap-fit port fittings
• Corrosion resistant materials
• Meets USCG Regulation 183.410 and ISO 8846 MARINE (ignition protection)
• Meets EN 50081-1 Electro-magnetic Compatibility

Body Materials	Glass Filled Polypropylene
Diaphragm	Santoprene
Valves	EPDM
Port Type	1/2" (13mm) Hose barb or Thread
Voltage	12 Volt
Motor Type	Thermal overload protection
Weight	2.8 (kg) 6 (lb)

Flow rate: 13.7-16.3 Litres/min (3.7-4.5 gallons/min)
Self-priming from dry up to 2.4m (7.8ft)

• Variable Speed Control
• Solid State Pressure Sensor
• Nearly Silent Operation / No Cycling
• Operates on 12V or 24V
• Controls Pressure by Changing Motor Speed
• Speeds Up As Demand Increases
• Self-priming / Runs Dry
• No Accumulator Tank Needed
• CSA Listed / EN ISO 8846 Marine / C.E. Certified
• Protected under U.S. Patent #6,607,360
• Includes Inlet Strainer

Body Materials	Glass Filled Polypropylene
Diaphragm	Santoprene
Valves	EPDM
Port Type	1/2" (13mm) Hose barb or Thread
Voltage	12 Volt
Motor Type	Permanent magnet, double ball bearingarmature. Electronic speed control builtinto rear endball.

Designed for boats with 2 or 3 fixtures. Serves up to four outlets simultaneously. Can be used in saltwater systems for galley rinse water. Self priming. Diaphragm design allows for dry running. Built in discharge check valve.

Flow rate: Nominal 11.3 Litres/min (3 USgallons/min)
Self-priming from dry up to 1.5m (4.9ft)

• Diaphragm Design Allows Dry Running
• Built-in Discharge Check Valve
• Quiet Operation
• Built-in Hydraulic Pulsation Dampener
• Large Vibration Absorbing Pads
• Ports Available with Barb, Threads or Flare
• Meets USCG Regulation 183.410
• ISO 8846 MARINE for Ignition Protection

Body Materials	Plastic
Port Type	1/2" or 5/8" ID Hose barb
Voltage	12 Volt
Weight	11 (lb) 5.0 (kg)

8 1/4" H x 6 5/8"W x 5 1/2"L

Flow rate: Nominal 12.5 Litres/min (3.3 USgallons/min)
Self-priming from dry up to 1.5m (4.9ft)

• Diaphragm Design Allows Dry Running
• Built-in Discharge Check Valve
• Quiet Operation
• Built-in Hydraulic Pulsation Dampener
• Large Vibration Absorbing Pads
• Ports Available with Barb, Threads or Flare
• Meets USCG Regulation 183.410
• ISO 8846 MARINE for Ignition Protection

Body Materials	Plastic
Port Type	1/2" or 5/8" ID Hose barb
Voltage	12 Volt
Weight	11 (lb) 5.0 (kg)

A service proven pump for larger boats with 3-4 fixtures. Designed to supply a reliable smooth and steady flow of water for up to four fixtures. Features run dry capability, built in check valve, pulsation dampeners, low amperage motor and ports sized to take 1/2"-5/8" hose.

Flow rate: Nominal 15.9 Litres/min (4.2 USgallons/min)
Self-priming from dry up to 1.5m (4.9ft)

• Diaphragm Design Allows Dry Running
• Built-in Discharge Check Valve
• Quiet Operation
• Built-in Hydraulic Pulsation Dampener
• Large Vibration Absorbing Pads
• Ports Available with Barb, Threads or Flare
• Meets USCG Regulation 183.410
• ISO 8846 MARINE for Ignition Protection
• Measures 8 1/4" high, 7" wide, 5 9/16" long.

Body Materials	Plastic
Port Type	1/2" or 5/8" ID Hose barb
Voltage	12 Volt
Weight	12 (lb) 5.4 (kg)

The Jabsco Dual Sensor Max VSD is designed specifically for water pressure systems in boats and recreational vehicles.  Using state-of-the-art electronic control.  Patent pending circuitry reduces power consumption and noise at low flow rates and eliminates the need for a bulky accumulator tank. Pump cycling and water hammer are virtually eliminated.

Flow rate: 34 Litres/min (9 gallons/min)
Self-priming from dry up to 2.4m (7.8ft)

• True sensor regulated water pressure
• Eliminates need for accumulator tank
• Self-priming – Runs dry without damage
• CSA Listed: 93/68/EEC, IEC 60335-1, 89/336/EEC, ISO 8846, ISO 10133:2000
• Patent Pending
• Motors meet USCG Electrical Regulation 183.410 and ISO 8846 MARINE for IGNITION PROTECTION on gasoline powered vessels.

Body Materials	Glass Filled Polypropylene
Diaphragm	Santoprene
Valves	EPDM
Port Type	1/2" (13mm) Hose barb
Voltage	12 Volt
Motor Type	Permanent Magnet DC typeSensor based electronic speedcontrolDouble ball bearing armature
Weight	15.0 lbs. (lb) 6.8 kg (kg)

Automatic Two Stage Water System with Accumulator Tank and Pumpguard Strainer

Flow rate: 28 Litres/min (7.5 gallons/min)
Self-priming from dry up to 1.5m (4.9ft)

• Run Dry Ability
• Smooth Flow
• Low Amp Draw
• Two Stage Operation
• Easy Installation
• Internal Bladder Accumulator Tank
• Meets USCG 183.410 and ISO 8846 MARINE for Ignition Protection

Body Materials	Glass Filled Polypropylene
Port Type	3/4" Hose barb
Cut-In	1.4 (bar) 20 (psi)
Cut-Out	2.8 (bar) 40 (psi)
Voltage	12 Volt
Motor Type	Permanent Magnet Type with Thermal Overload Protection
Accumulator Tank	Hygienic, impact and pressure resistant Plastic Construction. 33 fl. oz (1 Liter) capacity.
Weight	15 (lb) 6.8 (kg)

Jabsco PAR-Max Water Pressure pumps have provided years of great service to many boaters. Now Jabsco has refined the product line with two new pumps. The 1.9 GPM and 2.9 GPM (7 LPM and 11 LPM) are designed for vessels requiring a quiet, smooth flow, on-demand pump. These new pumps feature a three chamber diaphragm design offering a smooth flow from .65 GPM to 2.9 GPM (2.5 LPM to 11 LPM), and come with a built-in Pulsation Eliminator to control unwanted cycling and noise. These performance characteristics match the needs of the typical vessel with up to three fixtures.

Flow rate: 7 Litres/min (1.9 gallons/min)
Self-priming from dry up to 2.4m (7.8ft)

• Smooth flow
• Dry running capability
• Soft noise absorbing mounts
• Snap-fit port fittings
• Built-in bypass -less pulsation
• Reduces need for accumulator tank
• Corrosion resistant materials
• CSA listed
• ISO 8846 MARINE (ignition protection)

Body Materials	Polypropylene
Diaphragm	Santoprene
Valves	EPDM
Port Type	1/2" (13mm) Hose barb
Voltage	12 Volt
Motor Type	Thermal overload protection. IP 54 rating
Weight	1.4 (kg) 3 (lb)

Please click on the View Options button to view available options or to place an order.

Model No.: 32600 - Series

• Smooth Flow
• Self-Priming up to 10 feet (3m)
• Dry Running Capability
• Soft Noise Absorbing Mounts
• Snap-fit port Fittings
• Corrosion Resistant materials
• Motor Rating: IP 54
• ISO 8846 MARINE (ignition protection)
• CE
• 12 Volt



Motor Type	Permanent Magnet, ball bearing totally enclosed Not for continuous duty. Intermittent duty only.
Body Materials	Polypropylene
Diaphragm	Santoprene
Valves	EPDM
Fittings	(2) 1/2" (14mm) Male Pipe(2) 1/2" (13mm) Hose barbs


 

Fully assembled pressure set that consists of a Par Max pump, strainer and pre-pressurized accumulator tank with quick connect electrical connections on a rubber mounted board. Serves up to four 1/2" outlets.

Flow rate: 14.4 Litres/min (3.4 gallons/min)
Self-priming from dry up to 1.5m (4.9ft)

Ideal for up to four outlets.

• All units mounted on one board for rapid andeasy installation by boatbuilder and boatowneralike.
• Run dry ability.
• Smooth even flow.
• Simple and low cost installation.
• Thermal overload protection.
• ISO 8846 MARINE (Ignition Protection).
• Meets USCG Electrical Requirements including Ignition Protection.

Body Materials	Glass Filled Polypropylene
Port Type	13mm (1/2") id hose barb and 1/2" Thread
Voltage	12 volt
Weight	6.6 (lb) 3 (kg)

Variable Speed Drive (VSD) converts everyday pumps into sensor-controlled pumps that automatically adjust in real time to changes in pressure. As less flow is required, the pump motor slows down to provide a smooth and pulsation-free performance.


Model No.: 31777-0000


• Provides smooth and quiet water flow
• Works on most water pressure pumps rated 3-12 amps
• Eliminates Accumulator Tank
• Runs on 12 or 24V Input

Voltage	12/24 (Vdc)
Amp Draw	Depends on pump: Up to 12 (amp)
Weight	8.2 (oz)  (g)


 

Available in 2 sizes: 2.9 Gallons Per Minute (GPM) or 3.5 GPM.

Quiet operation
Smooth flowing
Self priming
Integrated pressure switch turns pump on and off automatically when spray nozzle is opened and closed
Can be run dry without damage
Low power consumption
Quick disconnect fittings
Warranty 3 years
Made in the USA

12 Volt

Please click on the View Options button to view available options or to place an order.

Self-priming diaphragm pump. Flow rates up to 17 litres/min (4.5 US gallons/min), pressure switch control, capable of pressures up to 2.8bar (40psi)Ideal for cleaning leisure boats, fish boxes, anchor chains and dinghies.All models include strainer, 'L' also includes a nozzle.

Model No.: 4325 Series

• Self-primes up to 2.4m vertical lift
• Quick-connect plug-in ports for easy installation
• Optional pressure nozzle control to run the pump only as needed

Voltage	12 (Vdc)
Flow Rate	4.5 US Gallons/Min (17 Litres/Min)
Pressure Switch Setting	20psi (1.4 bar) Cut In, 40psi (2.8 bar) Cut Out
Amp Draw	6.0 (amp)
Port Type	3/4" Hose and 3/4" Thread included
Strainer	Included
Nozzle	See 'L' Models

Fully automatic water system pump measures less than 6-1/2" in length and can supply up to 3 fixtures, one or two at a time in small boats, folding campers and vans. Built-in pressure switch automatically starts and stops pump when faucet is opened and closed. Self-priming so pump can be located above water tank. Able to run dry for extended periods. Built-in thermal protector and 3/8" hose barb ports. 12V. 2.3"H x 3.5"W