Designed for use as a washdown or water circulation pump for livewells. This high capacity pump is rated at 3800 GPH. Delivers a lot of water at low pressure, however it is not self priming. Fully Submersible. Easy clean snap lock strainer. Silent and vibrationless operation. Anti-airlock protection. Compact, efficient long life motor. Ignition protected. No burn-out when run dry.

GPH @ Open Flow 3800
Fuse Size 25 amps
Discharge Opening 1-1/2"
Inlet Opening 1-1/2"
Height 5-1/4"
Width 8-1/2"
Depth 6-1/2"
Rust and Corrosion protection
Used by leading boatbuilders worldwide
marine grade blocked wiring

The Blaster is perfect for tough washdown applications, such as a fish box, scaling, and anchor chain cleaning. These rugged self priming pumps deliver high lift, can run dry without damage and won't overheat with extended use. Pumps are ignition protected and switches sealed against water damage. Pump Kit comes with Pump, Nozzle and Fittings. Designed for Freshwater usage.

12v
3.5 GPM
Max. amps 9.9
Self priming pump, delivers high lift
Can run dry without damage
Switches sealed against water damage
Ignition protected
1 year manufacturer warranty

Designed for the toughest applications. Delivers over 5 GPH and pressure up to 45 psi. Sealed motor with marine waterproof coating. This high volume pump will clean your deck quickly. 12 Volt.

The Water Puppy can deliver almost seven gallons per minute at open flow. It is equipped with a new pressure cast bronze body which features a reusable O-ring type end cover seal. The ports have 1/2" internal pipe thread and 1" external hose barb. Included are two port adapters to connect common garden hose.

6.3 gallons per minute
1/2" NPT inlet ports
1" Hose exterior ports
Not Reversible
12 Volt

The Commercial Duty Water Puppy uses the same pressure cast pump head but offers increased flow and durability to meet the demands of commercial and workboat applications. It features a high speed long-life motor with ball type shaft bearings.

7.8 gallons per minute
1/2" NPT inlet ports
1" Hose exterior ports
Not Reversible

SHURflo’s new washdown kits include everything you need for tough washdown applications all in one box. The kit includes the Pro Blaster Pump, fittings, Blaster nozzle, Guardian Raw Water Strainer and twenty-five foot coiled hose.

Voltage 12 VDC
Dimensions 8.09" X 5.0" X 4.40"
Flow Rate 3.4 GPM [12.8 LPM]
Amps 9.9
Shut Off 45 PSI [3.1 Bar]

Rule Pumps 1800 GPH Computerized Automatic Submersible Sump Water Pump # A53S senses the presence of water without external floats or switches to tangle, stick or fail. For draining basements, boats, ponds, sumps, etc. Submersible in fresh or sea water.

Outlet Port is 1 1/8" and comes with Garden Hose adapter.

"Cyclone Pump" Stainless Steel DC Motor/Pump Unit

Flow rate: 110 Litres/min (29.7 gallons/min)
Pressure up to 0.6 bar (8.7psi)

Model No.: 50840 series
Heavy duty robust stainless steel construction

• One tool servicing (3/8" Spanner)
• Virtually silent running centrifugal pump
• Long-life DC motor
• Rotatable head 90° segments
• Anti-clogging impeller design
• Long-life mechanical seal
• ISO 8846 MARINE and USCG Regulations for Ignition Protection.
• ISO 8849 MARINE Bilge Pump Standard

Body Materials	Stainless steel
Port Type	3/4" (19mm)
Voltage	12 or 24 (Vdc)
Motor Brush Life	3500 (hrs)
Duty Cycle	Continuously rated @ 20°C ambient, 20°C Fluidtemperature at 2.5 metres of water (0.25 bar) (see PerformanceCurve)
Weight	6.3 (lb) 2.88 (kg)

Flow rate to 4.0 USgallons/min (15 Litres/min)
Pressure up to 60 psi (4.1 bar)
Self-priming up to 6 feet (1.8m)

Model No.: 32605/32900 Series

• New Compact 3 chamber design for greater pumping efficiency
• Model 32605 includes Pumpgard Intake Strainer, Pressure Nozzle and Port Fittings
• Model 32900 includes Pumpgard Intake Strainer, Pressure Nozzle, Port Fittings and 25' of hose coil
• Corrosion resistant
• Sealed motor
• ISO 8846 MARINE (Ignition Protection Standards)

Body Materials	Glass Filled Polypropylene
Port Type	3/4" (19mm) Hose Barb
Shut off Pressure	4.1 (bar) 60 (psi)
Voltage	12 Volt
Motor Type	Permanent Magnet
Weight	5 (lb) 2.1 (kg)

Flow rate to 7.0 USgallons/min (26.5 Litres/min)
Pressure up to 80 psi (5.7 bar)
Self-priming up to 8 feet (2.5m)

Model No.: 52700/52900 Series

• New 5 chamber design
• Model 52900 includes Pumpgard Intake Strainer, Pressure Nozzle, Port Fittings and 25' of hose coil
• High Pressure / High Capacity
• Suitable for Use with Salt Water
• Sealed motor
• ISO 8846 MARINE (Ignition Protection Standards)

Body Materials	Glass Filled Polypropylene
Port Type	(2) 3/4" (19mm) Hose Barb & (2) 3/4" (19mm) Hose Barb 90deg Elbow
Shut off Pressure	5.7 (bar) 80 (psi)
Voltage	12 Volt
Motor Type	Permanent Magnet
Weight	14 (lb) 6.4 (kg)