Lifts and empties water quickly and effortlessly. Safe and works well
under water. Runs up to five hours by three D-cell batteries (not included).
Comes complete with 42" hose which wraps around pump housing for convenient
storage. Dimensions: 5-1/4" dia. x 6-3/8" H.
Designed specifically with the Sea-kayaker in mind. Includes a pump sleeve float to keep the pump afloat if dropped overboard. Includes an aluminum reinforcing shaft which prevents the pump shaft from flexing in a rolling sea and won't affect compass. 18" long, 1 3/4" diameter. Pumps 8 gallons per minute.
Self priming and self lubricating. Easy to clean. Will not mar boat. Solvent
welded construction. Will withstand temperatures up to 120 F. Special all
polyvinyl body and shaft. non conductive and non corrosive. Available without
hose, with flexible hose or with rigid hose. Available in a variety of
sizes.
BECKSON THIRSTY MATE PUMP SELECTION CHART
Model
Length
Diameter
Strokes/Gallon
GPM
Hose
118P
18"
1 1/4"
10
6
None
118PH
18"
1 1/4"
10
6
20" Rigid
118PF
18"
1 1/4"
10
6
20" Flexible
124P
24"
1 3/4"
6
10
None
124PF
24"
1 3/4"
6
10
24" Flexible
124PF6
24"
1 3/4"
6
10
6' Flexible
136PF
36"
1 3/4"
4
13
36" Flexible
136PF6
36"
1 3/4"
4
13
6' Flexible
224PF
24"
1 1/2"
7
8
24" Flexible
230PF
30"
1 1/2"
6
10
32" Flexible
Please click on the View Options button to view available options or to
place an order.
For oil, diesel fuel, water, boat, home and car. Pump half strokes to start flow. Once flow begins, fully extending the handle will allow siphoning provided that the source is higher in elevation than the receptacle. U.S. Patent
Supplied with clear tubing to allow versatile application. Cut tubing for desired length of intake and discharge hose. When finished siphoning or pumping flammable liquids, be sure to drain siphon pump of liquid before storing. This pump not intended for transfer of liquid over 120°F (49'°C) nor solvents that will attack PVC.
LENGTH: 11-1/2" (28.4cm) DIAMETER: 1-1/4" (32mm) LIFTS: 4 oz (.12 L) per stroke
Tough proven Whale design Easily removable clamp ring for quick maintenance. Quick and easy to fit Completely enclosed protected diaphragm 53 ltrs (14 US gals) per minute. Only 119 mm (4¾”) deep for low profile installation. Rotatable inlet and outlet nozzles for flexibility. Supplied complete with deckplate. Suitable for pumping diesel.
Compact, lightweight and sturdy. Easy lever action permits fast pumping rate.
Handle can be oriented in any direction. Compact design for confined spaces
Ideal for small to medium sized boats Easy access for maintenance Up
to 43 litres (11.4 US gals) per minute Smooth easy pumping action Dual
size hose connections for 25mm or 38mm (1" or 1½") hose Deck, bulkhead or
thru-deck installation Suitable for diesel transfer with Nitrile diaphragm
Robust lightweight design
Largest Whale Bilge Pump. Over 117 litres (31 US gals) per minute maximum
output.
Twin diaphragms ensure pump continues working if one is damaged.
Double action pump. Powder coated diecast aluminium alloy. Nitrile valves
and diaphragms Can pump oily bilge water; effluent and diesel No tools
required for inspection and cleaning Will pump with one damaged diaphragm
Available for deck, bulkhead or underdeck (deckplate included) mount
Pump may be accepted on some vessels for use as an emergency fire pump
Diecast alloy bilge pump, Robust - ideal for workboats, cruisers, offshore
racing. Self priming with a light and easy pump action. Up to 65 litres (17 US
gals) per minute. Easy to install. Bulkhead, on deck or thru deck mounting.
Large non-choke valves Approved for use in lifeboats Suitable for
diesel transfer with Nitrile diaphragm (service kit AK3714 available separately)
Designed for instant access and easy maintenance Suitable for manual
pump-out of effluent holding systems
Versatile bilge and water transfer pump. Can be installed on-deck,
through-deck, on bulkhead or through-bulkhead. Lightweight but robust
construction in tough plastic. Easy access for cleaning and inspection (no tools
required). Odor proof seals High output pump 75 litres (20 US gals) per
minute Rotatable body and inlet/outlet to suit the hose direction
Protected diaphragm and inspection port Non-choke valves Suitable
for pumping diesel Approved by Lloyds (MSA) and USCG as a Lifeboat bilge
pump
