Trident Barrier Lined A1-15 Fuel Hose (Distribution, Return, Vent, and Transfer) for both gasoline (petrol) and diesel (including alcohol blends). Exceeds ABYC H-24 & H-33, SAE J1527, ISO 7840, & USCG Type A1; and is NMMA Type Accepted & CE certified. It is also compliant with CARB Regulations. Built with best fuel, fire and age resistant formulation, 2 spiral reinforcement and unique "Barrier Liner" on inside surface of tube so fuel is not in direct contact with rubber. Provides extraordinary resistance to fuel permeation and aging, as well as fire, heat, cold, and ozone. Also good Bend-ability.
Premium marine fuel fill hose. Thick wall with smooth tube and cover, and wire helix between 2 ply reinforcement for excellent flexibility and bend radius. Resists permeation, fire, heat, cold, ozone and premature aging by all marine fuels including alcohol blends. Exceeds Newest Type A2 (USCG, SAE, ISO, ABYC) Std. NMMA Type Accepted, CE certified. Lloyds Register Type Approved.
Premium B1 fuel line hose. Thermo-plastic reinforcement gives excellent
flexibility, bend radius, resistance to UV, cold, aging and permeation by all
marine fuels including alcohol blends. Exceeds Newest Type B1 [USCG, SAE, ISO,
and ABYC] Std. NMMA Type Accepted. CE certified. For I/B and I/O fuel systems,
this is THE O/B fuel line hose for the domestic market and the ONLY one for the
international market.
Wire supported vinyl ducting resists weather, sunlight and ozone. Won't support flame.
#400-402: Standard vent ducting 3 mil.
#406: HD vent ducting 6 mil.
Operating temperatures 0° to +160° F
(-18° to +71° C)
Extremely flexible and tough corrugated polyethylene hose for bilge intake and discharge. Cuffed every foot for clamping. Resists oily bilge and sea water.
NOT RECOMMENDED FOR BELOW WATERLINE THRU-HULL CONNECTIONS.
Operating tempratures -40° to +200°F
(-40° to +93°C).
Non-toxic FDA compounded PVC for many unpressurized, cool water uses like fresh water drain and vent lines. Operating tempratures (+20° - +150° F). NOT RECOMMENDED FOR BELOW-THE WATERLINE THRU-HULL CONNECTIONS
Nylon reinforced. FDA compound PVC for pressurized drinking water systems, ect.
No taste or odor. #164 "Cold Water". Max
W.P. depending on I.D size @ 70°F (21° C)
#162 = 175 PSI (1.21Mpa)
#164 = 150 PSI (1.03Mpa).
Operating temperatures +20° to +150° F
(-7° to 66° C).
NOT RECOMMENDED FOR BELOW WATERLINE THRU-HULL CONNECTIONS.
Heavy duty non-toxic FDA compoundPVC with nylon reinforcement. For pressurized drinking systems and many other uses. Resists odor, taste and up to 250 PSI/WP (depending onI.D. size) @ 70° F (21° C). For cold and hot tap water.
Operating temperatures: +20° to +150° F
(-7° to +66°C). Good flexibility and bend radius. Below water line connections - recommend double clamping and sealing compound.
Corrogated heavy wall vinyl hose with smooth tube. Low permeation & FDA (white only) compounds for potable water fill, holding tank pump out, bilge, drain, scupper lines and live well use. Hard PVC helix gives exceptional flexibility & bend radius. NOT RECOMMENDED FOR BELOW WATERLINE THRU-HULL CONNECTIONS. No cuffs required but may use #143 RHT cuffs. Operating temperatures +10° to +140°F
(-12° to +60°C).
Heavy duty bilge, drain and live well hose. Clear see thru vinyl (FDA) corrugated with black hard PVC helix and smooth tube. Provides exceeptional flexibility and bend radius. NOT RECOMMENDED FOR BELOW WATER LINE THRU-HULL CONNECTIONS. No cuffs required.
Operating temps: +10° to +140° F
(-12° to +60°C).
High temperature, EPDM rubber, polyester reinforced and exceeds SAE J20R3. Resistant to coolants, ozone, cold and heat; and serves a variety of boat and plant pressurized applications. 300psi rated.
Operating temps: -40° to +212° F . For below or above waterline intake and discharge applications.
A premium fabric reinforced marine hose suitable for short, straight applications. Heavy wall construction reinforced with, depending on diameter, 2 to 6 plies of tough synthetic spiral cord. Compounded to resist engine heat, exhaust fumes, ozone, mild acids, engine coolant and salt water.
For use where wire support is unnecessary
Designed for engine coolant and water circulation, heat exchanger, discharge lines and straight marine wet exhaust applications
Max. temperature: 250F
Marked continuously with size and part number
Meets or exceeds standards for type certified wet exhaust hose
5-year warranty
A premium wire reinforced marine hose for longer runs and bent connections. Designed for engine intake, bilge discharge, toilet and holding tank connections and scupper lines. Also for marine wet exhaust where connection requires a long length (greater than four times the inside diameter) or the connection requires a significant bend.
Heavy wall construction reinforced with wire helix imbedded between two tough synthetic spiral cord plies.
Construction allows excellent flexibility, bend radius, resists panting and collapsing and provides excellent service life.Compounded to resist engine heat, exhaust fumes, ozone, mild acids, toilet effluent, salt water and abrasion.
Recommend double clamp and sealing compound for below water line connections
Meets or exceeds standards for type certified wet exhaust hose
All 300 stainless steel. Installs at 30-35 lbs. No spot welds to rupture under stress or corrosion. Deep slotted, shouldered, 5/16" hex-head screw for socket wrench, nut driver or screwdriver installation. Contains 10 per box. Sold and priced in boxes only.
