Smooth flow, quieter water systems. Internal rubber membrane eliminates maintenance, and allows universal mounting. Better control of hot water temperatures. Simply fitted to new or existing systems. Longer pump life, lower battery drain. Snap-in port fittings.

Connections for 1/2" hose.

13-1/4"L x 4 3/4"W x 4 3/8"D

Will smooth flow from faucets and shower, reducing pump cycling and eliminating pulsation and water hammer.
Water is totally separated from air chamber and metal tank by a bladder and polypropylene tank liner.
NSF-61 listed for all water applications.
Volume of tank is 2 gallons with a working water volume of approximately one gallon.
Mounts horizontally or vertically, even upside down.
Includes Stainless Steel brackets and band clamp.
100 psi (6.9) bar maximum working pressure.
Pre-pressurized to 20 psi (1.4 bar).
Tank may be fine tuned to cut-in pressure of pump

Smoothes water flow & reduces on/off switch cycling of pump by lessening variation in pressure & flow between pump & system discharge points. Even flow of water gives better control of hot water temperature w/systems using instant water heaters. Compact design allows installation in tight spaces.

Fluid capacity of 21.5 oz. Pre-charged to 10 psi.

Operating system pressure up to 125 psi.

Quick-connect fittings included.

Impossible to waterlog. System water pressure is separated from fully adjustable air charge by neoprene diaphragm. Recommend same air charge as pump cut-on pressure. Mounts in any position. Stainless steel mount straps included.
12" L x 8" dia.
1 Gallon Capacity