The S-Series is an excellent choice for multipurpose applications. The
compact size makes it perfect for small boats or jet ski fender and mooring
applications where you don't have a lot of storage room. When you're not using
it for a fender it makes a great buoy for course marking as well as small pot
and trap fishing - much more distinctive and durable than the "bleach bottle."
The elongated shape allows this buoy to sit higher in the water than a round
buoy, making it more visible.
Polyform's G-Series fender has raised the bar for quality and appearance in
utility fenders. Subscribing to the philosophy that quality does not have to
cost more, we include ribs for extra strength, inflation valves for larger sizes
and reinforced ropehold area for long term durability. These buoys ship fully
inflated.
Available in 6 sizes and 8 colors.
Please click on the View Options button to view available sizes/options or to
place an order.
The F-Series fender has offered protection to the finest yachts and fishing
vessels all over the world. Why? Because the owners and the captains of these
prestigious boats know that they can rely on Polyform's F-Series to offer the
size, strength and dependability to protect their vessel from the rigors of the
sea and weather. If you want the ultimate in protection for your boat, Polyform
F-Series is the only choice!
Available in 2 sizes: 9" x 30" and 12" x 30". White with blue ends.
Please click on the View Options button to view available sizes/options or to
place an order.
In keeping with the Polyform tradition of quality, the HTM (hole through middle) fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from being pulled through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features this high quality fender has to offer.
Designed for use in medium duty applications in both permanent protected and unprotected moorings
Unique Polyform valve for years of service
The first boat fender to address the needs of low freeboard boats. Shaped to
protect the gunwales and rubrail, the Low Freeboard fender offers superior
protection compared to regular fenders against high docks. Low Freeboard fenders
can be tied over the cleat to position it higher on the boat, putting protection
where it is needed. Made from specially formulated tough marine grade vinyl and
features an inflation valve for air pressure adjustment. Standard size measures
14" long and larger size measures 23" long for increased hull protection.
Please click on the View Options button to view available sizes/options or to
place an order.
Uniquely shaped to fit the stern of a sailboat or the edge of most swim
platforms up to 4" thick. An integral 3/4" diameter tube allows a securing line
to pass from end to end while a contoured shape helps the fendering location.
Made from soft, flexible vinyl. Rubber football inflation valve to adjust the
level of firmness to satisfy all applications.
Freedom Fenders The Worlds Only Self-Centering Fender
Lightweight enough for any crew member to handle easily. These fenders can be
relocated instantly by any one person! No more dragging huge fenders across the
deck! Rotationally molded from heavy gauge PVC, freedom fenders feature a needle
valve for easy inflation. The patented V shape stays on pilings no matter which
way the boat moves. The recessed line holders allow them to fit standard fender
racks. Hang them vertically or horizontally for the ultimate in versatility
whether docking on pilings, floating docks or mooring!
Stock No.
Color
Length x Dia.
Boat Size
#FF2685W
White
26" x 8.5"
25' - 35'
#FF3212W
White
32" x 12"
35' - 65'
#FF3212B
Black
32" x 12"
35' - 65'
Please click on the View Options button to view available sizes/options or to
place an order.
The versatile Big B fender incorporates a Center Rope Tube that allows
end-to-end line passage. It can be hung vertically or horizontally with a single
line. Horizontal hanging is useful protection against pilings, awkward docking
situations, and tidal change areas. Big B TMinflatable vinyl fenders feature
seamless construction, with molded ribs to minimize roll. Big B?s are made from
the highest quality marinegrade vinyl with a high gloss finish.
Available in four sizes and 3 colors to fit a full range of boat sizes.
Please click on the View Options button to view available sizes/options or to
place an order.
Comes with built in Infusion Micro Pump which allows you to quickly add or
remove air without removing the fender. Lab tested for durability and
performance, these fenders feature an innovative reinforced design.
Available in white or blue, 3 sizes.
Please click on the View Options button to view available sizes/options or to
place an order.
TaylorMade Products has incorporated the latest in technology, design
innovation, and attention to detail to bring you the finest looking, top
performing protection for your dollar. Super Gard fenders are in a class of
their own. Made from the highest quality marine grade vinyl, Super Gards feature
a HIGH GLOSS finish and double molded black ends for extra strength where you
need it the most. Seamless one-piece construction with ribbed sides minimizes
roll, and a molded-in valve ensures easy inflation and long life.
Available in 4 sizes: 5 1/2" x 20", 6 1/2" x 22", 8 1/2" x 26", 10 1/2" x 30"
Tuff End fenders are for heavy duty marine applications. Constructed from the
same flexible, resilient vinyl as our Super Gard, Big B, and Hull Gard fenders,
the end in each Tuff End is injection molded for extra strength and reliability.
Tuff Ends are designed to perform under the most demanding conditions. Tuff End
fenders feature seamless construction, the strongest in the industry!
Available in 2 sizes: 8" x 27" and 15" x 41" White with Black Ends.
Please click on the View Options button to view available sizes/options or to
place an order.
The Pontoon Fender is specifically designed to fit snugly between the pontoon
and the deck of the boat, protecting both from rafting boats, docks, or other
objects. All pontoon fenders are made from our own marine-grade, U.V. resistant
vinyl and have an integrated rubber football style valve for easy
inflation. Color is white: 9"W x 16"L
The Fence Saver secures to the fence or railing and is designed to prevent
contact to the delicate aluminum fencing. The fence saver is especially
effective preventing those nasty dings that occur when rafting a pontoon boat to
a conventional hull boat. Color is white: 9"W x 36"L
The pontoon corner bumpers come in two shapes for both radius style or 90
degree pontoon corners. The corner bumpers mount over the original factory
installed aluminum corner section to provide air-cushioning impact protection
when docking. Each corner section is molded from a special gray pvc formulated
to match the aluminum color of the boat and secures with stainless fasteners.
Both are Gray: 3"W x 12"L
Please click on the View Options button to view available sizes/options or to
place an order.
The only fender specifically designed for maximum protection when rafting or
tying up against solid walls. This unique rectangular cushion will provide
greater protection from boats jarring into each other than conventional fenders.
Six molded tubes provide crush resistance, and the exclusive channel design
lends itself to "hugging" the boat . Fender CushionsTM are made from tough
marine grade vinyl and feature an inflation valve for air pressure adjustment.
Fender CushionsTM may be hung vertically or horizontally. They make great piling
cushions and are extremely comfortable as seat cushions.
Available in 2 sizes: 15"L x 15"W x 6 1/2"H and 20"L x 20"W x 7 5/8"H
Please click on the View Options button to view available sizes/options or to
place an order.
