Constructed from marine quality bronze and stainless steel for ruggedness and reliability.

Flow rate: Nominal 80 Litres/min (17.8 gallons/min) at 1500rpm
Self-priming from dry up to 2.4m (7.8ft)

• Easy to service and maintain.
• Inexpensive to buy and operate.
• Will tolerate abrasive wear (this may affect performance - seek advice from your distributer).
• Handles hard and soft solids without clogging.
• Can pump in either direction.
• Will not airlock.

Ports: 1" NPT Internal
Weight: 5-3/4 lb (2.61 kg)
26 gpm (98 lpm) at 10ft (3m) total head at 1750 rpm.
Self-priming to 10ft(3m) vertical lift.
Lip seal or mechanical face seal.
Double-row ball bearing.

Available with Neoprene or Nitrile Impellers.

Please click on the View Options button to view available options or to place an order.

Flow rate: Nominal 40 Litres/min (8.9 gallons/min) at 1500rpm
Self-priming from dry up to 2.4m (7.8ft)

Constructed from marine quality bronze and stainless steel for ruggedness and reliability.

• Easy to service and maintain.
• Inexpensive to buy and operate.
• Will tolerate abrasive wear (this may affect performance - seek advice from your distributer).
• Handles hard and soft solids without clogging.
• Can pump in either direction.
• Will not airlock.

11.3 gpm (43 lpm) at 10ft (3m) total head at 1750 rpm.
Self-priming to 10ft(3m) vertical lift.
Lip seal.
IPT port 1/2" Diameter 5/8"
Two single row ball bearings.
Takes impeller neoprene 12100001

Please click on the View Options button to view available options or to place an order.

Flow rate: Nominal 20 Litres/min (4.4 gallons/min) at 1500rpm
Self-priming from dry up to 1.5m (4.9ft)

• Constructed from marine quality bronze and stainless steel for ruggedness and reliability.
• Easy to service and maintain.
• Inexpensive to buy and operate.
• Will tolerate abrasive wear (this may affect performance - seek advice from your distributer).
• Handles hard and soft solids without clogging.
• Can pump in either direction.
• Will not airlock.

5.8 gpm (22 lpm) at 10ft (3m) total head at 1750 rpm.
Self-priming to 10ft(3m) vertical lift.
Lip seal.
IPT Port 3/8" Diameter 1/2"
Two single row ball bearings.
Takes impeller# 186730001

Please click on the View Options button to view available options or to place an order.

Flow rate: Nominal 20 Litres/min (4.4 gallons/min) at 1500rpm
Self-priming from dry up to 1.5m (4.9ft)

• Constructed from marine quality bronze and stainless steel for ruggedness and reliability.
• Easy to service and maintain.
• Inexpensive to buy and operate.
• Will tolerate abrasive wear (this may affect performance - seek advice from your distributer).
• Handles hard and soft solids without clogging.
• Can pump in either direction.
• Will not airlock.

Ports: 1/4" NPT Internal
Weight: 1-1/2 lb (0.7 kg) approx.
3.7 gpm (14 lpm) at 10ft (3m) total head at 1750 rpm.
Self-priming to 10ft(3m) vertical lift.
Lip seal.
Neoprene impeller.
Double-row ball bearing.

Takes impller #45280001P

Please click on the View Options button to view available options or to place an order.

Pedestal pumps are for engine cooling, washdown, circulation and other general purposes. Corrosion resistant bronze. Bronze or Stainless steel shaft. Permanently lubricated ball bearings

Please click on the View Options button to view available options or to place an order.

Flow rate: Nominal 200 Litres/min (44.4 gallons/min) at 1500rpm
Self-priming from dry up to 2.4m (7.8ft)

2 Versions available. 6400-0004 is a universal application and 64001051 is a replacement for Catarpillar Engines.

Constructed from marine quality bronze and stainless steel for ruggedness and reliability.

• Easy to service and maintain.
• Inexpensive to buy and operate.
• Will tolerate abrasive wear (this may affect performance - seek advice from your distributer).
• Handles hard and soft solids without clogging.
• Can pump in either direction.
• Will not airlock. .

Wearplate: Replaceable
Shaft Seal: Carbon-Ceramic Face Type
Bearing: Pre-lubricated Double Row Ball
Ports: 1-1/4" (32mm) NPT Internal
Weight: 10-1/2 lb (4.8 kg) Approx.
62 gpm (235 lpm) at 10ft (3m) total head at 1750 rpm.
Self-priming to 10ft(3m) vertical lift.
Mechanical face seal.
Double-row ball bearing.

Please click on the View Options button to view available options or to place an order.

Pedestal pumps are for engine cooling, washdown, circulation and other general purposes. Corrosion resistant bronze. Bronze or Stainless steel shaft. Permanently lubricated ball bearings. 1 1/4 Universal Pump with neoprene impeller, full cam and mechanical seal.

Shaft Seal: Carbon-Ceramic Face Type
Bearing: Pre-lubricated Double Row Ball
Ports: 1-1/4" (32mm) NPT Internal
Weight: 10-1/2 lb (4.8 kg) Approx.
62 gpm (235 lpm) at 10ft (3m) total head at 1750 rpm.
Self-priming to 10ft(3m) vertical lift.
Mechanical face seal.
Double-row ball bearing.

Please click on the View Options button to view available options or to place an order.

Replacement for Sherwood G-21 on Pleasurecraft engines. 1" Port size.

Flow rate: Nominal 40 Litres/min (8.9 gallons/min) at 1500rpm
Self-priming from dry up to 2.4m (7.8ft)

• Constructed from marine quality bronze and stainless steel for ruggedness and reliability.
• Easy to service and maintain.
• Alternator mount
• Pulley Drive

Body Materials	Bronze
Impeller	Neoprene
Wearplate	Not Fitted
Shaft Material	Stainless steel
Seal	Carbon/ceramic mechanical type
Bearings	Twin single row, ball type
Port Type	1" (25mm) ID Hose
Weight	7 (lb) 3.2 (kg)

Please click on the View Options button to view available options or to place an order.

.

1 1/4" ports

Body Materials	Bronze
Impeller	Neoprene
Wearplate	Not fitted
Bearings	Twin single row, ball type
Port Type	1-1/4" (32mm) ID Hose
Shaft Material	Stainless Steel
Seal	Carbon-Ceramic Face Type
Pulley	6-1/2" Full Grip “A” Belt
Weight	7 (lb) 3.2 (kg)

Please click on the View Options button to view available options or to place an order.

Replacement for stock cast-iron, plastic and aluminum composite water pumps. Made of bronze and stainless steel, this pump withstands harsh, corrosive marine environments. 1 piece body makes occasional impeller or seal replacement easy. Includes replaceable cam and wearplate so that pump can be overhauled to like new condition.

Body: Bronze, One-piece
Impeller: Jabsco Neoprene
Shaft: Stainless Steel
Ports: 1-1/4? Hose Barb
Seal: Lip Type
Bearings: Sealed Ball Type
Shipping Weight: 7 lb (3,2 kg)
Left or Right Hand Rotation.
Bronze end plate.
Replaceable cam and wearplate.

Please click on the View Options button to view available options or to place an order.

Electrically activated clutch pump offers all the beneifts of flexible impeller pumps with substantial flow rate and horizontally oriented ports. Good for pumping bilges, washdowns, circulating water in bait tanks or as a utility dockside pump.

Flow rate: Nominal 23 USgallons/min (88 Litres/min) at 1750rpm
Self-priming from dry up to 2.4m (7.8ft)

• Constructed from marine quality bronze and stainless steel for ruggedness and reliability.
• Easy to service and maintain.
• Inexpensive to buy and operate.
• Will tolerate abrasive wear (this may affect performance - seek advice from your distributer).
• Handles hard and soft solids without clogging.
• Can pump in either direction.
• Will not airlock.

Body Materials	Bronze
Impeller	Nitrile
Wearplate	Replaceable
Shaft Material	Stainless steel
Seal	Carbon/ceramic mechanical type
Bearings	Twin row, ball type
Port Type	1" NPT
Clutch Type	Electro-magnetic 12 VDC
Pulley	178mm (7") 'A' or 'B' section
Weight	15 (lb) 6.8 (kg)

Please click on the View Options button to view available options or to place an order.

Electrically activated clutch pump offers all the beneifts of flexible impeller pumps with substantial flow rate and horizontally oriented ports. Good for pumping bilges, washdowns, circulating water in bait tanks or as a utility dockside pump.

Flow rate: Nominal 62 USgallons/min (234 Litres/min) at 1750rpm
Self-priming from dry up to 2.4m (7.8ft)

Constructed from marine quality bronze and stainless steel for ruggedness and reliability.

• Easy to service and maintain.
• Inexpensive to buy and operate.
• Will tolerate abrasive wear (this may affect performance - seek advice from your distributer).
• Handles hard and soft solids without clogging.
• Can pump in either direction.
• Will not airlock.

Body Materials	Bronze
Impeller	Nitrile
Wearplate	Replaceable
Shaft Material	Stainless steel
Seal	Carbon/ceramic mechanical type
Bearings	Twin row, ball type
Port Type	1 1/4" NPT
Clutch Type	Electro-magnetic 12Vdc
Pulley	178mm (7") 'A' or 'B' section
Weight	19.5 (lb) 8.9 (kg)

Please click on the View Options button to view available options or to place an order.