The Verna Ski was developed for ski boat applications. The design is based on the Vernatone family of inline mufflers. Available with straight inlet or 45" angled inlet.

Application: Ski Boats
Fuel type: Gas only
Waterline: Above only
Sound rating: Good

VERNA-SKI™
	Ports		Length		Diameter		Inlet
Part #	INCHES	MM	INCHES	MM	INCHES	MM
1000216	3.00	76	43.00	1092	4.38	111	Angled
1000217	3.00	76	40.00	1016	4.38	111	Straight

The Vernatone™ exhaust muffler is the original FRP water-cooled marine muffler. This style has been used by boat builders and boaters world wide for over 40 years. The Vernatone family of inline mufflers includes eight basic products with hundreds of variations in length, width, height, inlets and outlets. Builders and boaters requested these variations for specific engine or location requirements in a particular vessel. These mufflers also vary in size which influences the acoustical performance.

Application: All Inboards
Fuel type: Gas/Diesel
Waterline: Above only
Sound rating: Good

Available in Several Sizes. Please click item to view additional information.

The Vernalift muffler was designed originally for small auxiliary propulsion engines installed near or below the water line in sailboats. In the early 70’s the quieting capabilities of lift mufflers were recognized. The Vernalift family expanded to include new and larger engines.

Application: Inboards, Sailboats & Generators
Fuel type: Gas/Diesel
Waterline: Above or Below
Sound rating: Better

Please click on view options button to view a specification chart of available sizes.

The Vernalift muffler was designed originally for small auxiliary propulsion engines installed near or below the water line in sailboats. In the early 70’s the quieting capabilities of lift mufflers were recognized. The Vernalift family expanded to include new and larger engines.

Application: Inboards, Sailboats & Generators
Fuel type: Gas/Diesel
Waterline: Above or Below
Sound rating: Better

Please click on view options button to view a specification chart of available sizes.

The Vernalift muffler was designed originally for small auxiliary propulsion engines installed near or below the water line in sailboats. In the early 70’s the quieting capabilities of lift mufflers were recognized. The Vernalift family expanded to include new and larger engines.

Application: Inboards, Sailboats & Generators
Fuel type: Gas/Diesel
Waterline: Above or Below
Sound rating: Better

2" Inlet/Outlet. 10 5/32" High with 10 1/2" Base

Please click on item to view additional specifications.

For use where there is a shortage of space or V Drive Applictions. For Gas/Diesel fuel type. Above waterline use only.

Application: V Drives and shortage of space
Fuel type: Gas/Diesel
Waterline: Above only
Sound rating: Fair

Please click on view options button to view a specification chart of available sizes.

Lightweight, strong and non-corroding. Fittings are installed easily and their outside dimensions are compatible with tubing and approved marine rubber exhaust hoses.

Inlet/Outlet is 2"

Length is 17" from end of outlets.

This insulating fiberglass tape is the proper way to contain the heat radiated by hot manifolds, exhaust pipes and mufflers. Simply wrap the tape around the manifold, exhaust pipe or muffler and secure.

Available in 100' rolls. 2" wide or 3" wide.

This series of transom exhausts have a straight shank and come complete with countersunk base holes machined in the flange.

Available in 2 sizes:

3" OD x 5" Long with 5" OD Flange

4" OD x 4 3/4" Long with 7" OD Flange

Centek’s line of exhaust systems fittings are made of the same fiberglass and fire retardant resins used to produce Vernatube, the UL listed tubing line. These fittings are lightweight, strong, non-corroding, and durable. Fittings are installed easily and their outside dimensions are compatible with tubing and approved marine rubber exhaust hoses.

Centek Exhaust Ports are available in 2", 3" and 4" in either black or white. Please click on item to view a full specifications sheet of all available sizes.

Stainless Steel flap with rubber seal. Available in 2 sizes:

2 1/2" Diameter 5 7/8" long, 4 1/2" Flange

3" Diameter 5 7/8"Long, 4 1/2" Flange

Black rubber with adjustable stainless steel clamp. Flap valve prevents following seas from entering exhaust outlet when stopping or moving slowly.

Available in 3" or 4" sizes. 2 per pack.

VERNATUBE™ is a resin-impregnated glass filament wound tubing wound exclusively with a fire retardant resin formulated for high temperature applications. The smooth, resin-rich I.D. assures minimal restriction to exhaust gases and cooling water flowing through the tubing. Precise control of the outside diameter ensures ease of connecting mating ports with marine exhaust hose.
VERNATUBE™ exceeds values for the class of materials designated as “self-extinguishing” per ASTM –D-635, UL94V-O, and the US Navy/USCG MIL-R-21607 and MIL-R-7575.

Available in several diameters from 1" OD to 8" OD. All lengths are 10' long except for 1" OD size which is a 5' piece.

*Note: All 10' lengths must be shipped via common carrier freight truck. Actual shipping rate will be emailed to you for approval before order is shipped. Freight rated are variable depending on location of delivery.

Please click below to view a specification chart on available sizes and pricing.

Exhaust systems fittings are made of the same fiberglass and fire retardant resins used to produce Vernatube, our UL listed tubing line. The fittings are lightweight, strong, non-corroding, and durable. Fittings are easy to install and O.D.’s are compatible with approved marine rubber exhaust hose.

45" Elbows are available in several sizes.

Please click below to view a specification chart on available sizes and pricing.

Exhaust systems fittings are made of the same fiberglass and fire retardant resins used to produce Vernatube, our UL listed tubing line. The fittings are lightweight, strong, non-corroding, and durable. Fittings are easy to install and O.D.’s are compatible with approved marine rubber exhaust hose.

90 degree elbows are available in several sizes.

Please click below to view a specification chart on available sizes and pricing.

Exhaust systems fittings are made of the same fiberglass and fire retardant resins used to produce Vernatube, our UL listed tubing line. The fittings are lightweight, strong, non-corroding, and durable. Fittings are easy to install and O.D.’s are compatible with approved marine rubber exhaust hose.

Reducers are available in several sizes.

Please click below to view a specification chart on available sizes and pricing.

Exhaust systems fittings are made of the same fiberglass and fire retardant resins used to produce Vernatube, our UL listed tubing line. The fittings are lightweight, strong, non-corroding, and durable. Fittings are easy to install and O.D.’s are compatible with approved marine rubber exhaust hose.

Y Fitting has two 3" inlets and one 4" outlet.

T-Bolts Clamps: 3/4" (19mm) wide, 316 Stainless Steel band & 18-8 Stainless Steel T-Bolt & Lock Nut (with nylon insert). Very strong and secure for critical applications.

Use with hose, elbows and bellows.

Please click below to view spec chart on available sizes and pricing.

Premium wet exhaust hose for longer bent connections. In smaller I.D.'s for engine intake, critical water, drain, scupper bilge & sanitation uses. Extra heavy tube and cover with helix between 2 ply reinforcement provides excellent flexibility and bend radius. Resists heat, ozone, exhaust, sani chemicals, panting and collapse.

Exceeds New (SAE J2006, ABYC and NMMA) Stds. Black High Temp EDPM Rubber 250°F (121°C).