Discount

Add Discount Marine Supplies.com To Your Favorites

 



BizRate Customer Certified (GOLD) Site - Discount Marine Supplies Reviews at Bizrate

View this page in:

Translate to:
 
 
 

Dock Building Hardware
Dock Building Hardware

Click any product photo to view additional specs and information on that individual product.
DOCK EQUIPMENT Dock Building Hardware

Tie Down Dock Building Components
Tie Down Dock Building Components

Designed for use with 1 1/2" thick lumber. A full set of hardware, rollers and fasteners to complete your dock project. All you need is the wood.

Tie Down Dock Building Components are designed to use with 1 1/2" thick lumber (Standard 2 x "X" sizes). All hardware is designed to be mounted using 3/8" carriage bolts (Item M). All male and female dock to dock connections are made with either 3/4" bolts and locknuts or 3/4" connecting pins (item O).

Match the items listed below with the item on the diagram.

  • (A) Outside Corner (female) has two 1/2" welded tabs. Use with male outside corner (B). Each leg is 10"L x 5" H.
  • (B) Outside Corner (male) has one 1/2" welded tab. Use with a female outside corner to connect docks end to end. Joint requires 3/4" bolt set (N) or connector pin (O). Each leg is 10"L x 5"H.
  • (C) Outside Corner End. Use this corner at ends of fingers and docks. Ideal for swim floats and ski jump corners. Each leg is 10"L x 5"H
  • (D) Inside Corner. This heavy duty inside corner should be used with one of the outside corners. Each leg has elongated holes for easy fit up and is 8 1/2"L x 5"H.
  • (E) Inside Corner/Pipe Holder. These heavy duty inside corners should be used with one of the outside corners and has an internal pipe holder to be used with either 2" or 3" pipe. Measures 8 1/2"L x 5"H.
  • (F) Angle Bracket. Use this heavy duty angle for all cross supports. Each leg measures 2 1/2"L x 5"H.
  • (G) Female T connector. Has two welded 1/2" tabs. Bolts to side of dock to attach fingers and ramps. 5"L x 5"H.
  • (H) Male T connector. has one welded 1/2" tab. Use with female T connector (G) to attach fingers and ramps. 5"L x 5"H
  • (I) Washer Plate. use two washer plates with each angle. Measures 1 1/2"L x 5"H
  • (J) Chain Retainer. Bolts to side of dock. Use weights and chains to hold dock in place. Accomodates 1/4", 3/8" and 1/2" chain. Measures 5"L x 5"H.
  • (K) Pipe Holder/Outside. Bolts to outside of dock. Uses 2" pipe to hold dock in place.
  • (L) Lag Bolt Set. Bolt and flat washer hot dipped galvanized, used to attach flotation drums to dock system. Comes in 3 sizes.
  • (M) Carriage bolt Set. Used to attach A through K component parts. 3/8" x 2 1/2" bolt, flat washer and nut. Hot dipped galvanized.
  • (O) Connector Pin Set. For quick disconnect. Used to connect male and female T connectors. Galvanized 3/4" connector pin and hitch clip pin.
  • (Q) Back up plates. 5" x 5" reinforcing plates are used to back up the single T male and female connectors.

    Please click on the View Options button to view available sizes/options or to place an order.


    •
    Price: $ 4.95

    Click to Configure
    Tie Down 26415 Piling Loop & Roller
    Tie Down 26415 Piling Loop & Roller
    Piling hoop & roller intended for areas with a lot of wind, current or tidal action. Combines the piling hoop (#26412) and roller assembly (#26414) to make up for the up and down movement.

    For pilings up to 12" in diameter

    Regular Price: $ 311.49
    Our Price: $ 159.99

    Tie Down 26423 Hoop Roller Piling Holder
    Tie Down 26423 Hoop Roller Piling Holder
    Allows your dock to smoothly ride up and down pilings up to 12" diameter.
    Regular Price: $ 255.89
    Our Price: $ 139.99

     
    Tie Down 26419 Pile Chain Holder
    Tie Down 26419 Pile Chain Holder
    Four use as a pile holder with 3/8" galvanized chain and shackles. Can be adjusted for various pile diameters.
    Regular Price: $ 151.69
    Our Price: $ 79.99

    Tie Down 26412 Piling Hoop
    Tie Down 26412 Piling Hoop
    Heavy duty piling hoop for pilings up to 12" diameter. The hoop is constructed of 1 1/2" pipe and is hot dipped galvanized.

    It can be bolted direclty to the side of the dock or to the optional dock plate. (Item number TIE 26416)

    Regular Price: $ 140.59
    Our Price: $ 79.99

    Tie Down 26414 Roller Assembly
    Tie Down 26414 Roller Assembly
    Heavy duty 6" roller on a 5/8" shaft can either bolt direclty to the dock or to the optional deck plate (TIE 26416)
    Regular Price: $ 98.89
    Our Price: $ 56.99

     
    Tie Down 26416 Dock Plate
    Tie Down 26416 Dock Plate
    Reinforcing angle bracked designed to be used with the Tie Down Roller bracket (TIE 26414) or Piling Hoop (TIE 26412). Pre-drilled with holes for those items, plus bolting to the dock.
    Regular Price: $ 108.39
    Our Price: $ 59.99

    Dock Edge Dock Piling Caps
    Dock Edge Dock Piling Caps

    Piling caps protect pilings from internal rot. Available in black or white in a variety of sizes. Caps are available in round cone shaped top or round flat top as designated.

    Available in 7:. 8", 9", 10", 11" and 12" diameters. Black or white.

    Please click on the View Options button to view available sizes/options or to place an order.
    Regular Price: $ 13.49
    Our Price: $ 9.95

    Click to Configure
    Dock Edge Cast Aluminum Dock Cleats
    Dock Edge Cast Aluminum Dock Cleats

    These cast aluminum cleats are sand blasted to give a clean grey matte finish. Each cleat is designed with an extra wide footprint for added strength. As well, each cleat has an enlarged counter-sunk hole for easy installation with a socket. Can be through bolted or lag bolted.

    Available in 9" and 13".

    Please click on the View Options button to view available sizes/options or to place an order.
    Regular Price: $ 19.29
    Our Price: $ 14.99

    Click to Configure
     
    Dock Edge 96250F Solar Dock Light with Cleat
    Dock Edge 96250F Solar Dock Light with Cleat
    These solar lights are mounted on top of a sturdy steel base, housed inside an attractive,Colonial style 12” tall, 4” wide vinyl pillar. Easy to install and NO WIRES. These decorative and functional dock accessories will add style to your dock day or night. The lamp is designed to illuminate your boat, dock and stainless steel cleat, and not shine in your eyes.

    Each kit includes, pillar, stainless steel cleat, mounting base, solar light and rechargeable batteries.

    Regular Price: $ 99.99
    Our Price: $ 79.99

    Davis Portable Dock Ring
    Davis Portable Dock Ring
    No cleat or ring in place? Rings in the wrong place? Then use Portable Dock Rings as a convenient way to tie up your boat. Made of 5/16" (8 mm) heavy duty steel. Tested to hold even in wave action. Zinc plated to resist rust for years. Patented.
    Regular Price: $ 18.99
    Our Price: $ 15.99

    Galvanized Dock Cleats
    Galvanized Dock Cleats

    Hot dipped galvanized dock cleats come in 6 sizes to accomodate your dock.

    Please click on the View Options button to view available sizes/options or to place an order.
    Regular Price: $ 2.25
    Our Price: $ 1.69

    Click to Configure
     
    Dock Edge Classic Dock Cleats
    Dock Edge Classic Dock Cleats
    Cast from solid aluminum and powder coated to last. Distinctive and highly functional, they are availbale to suit any requirement.

    Available in white powder coated finish or cast aluminum finish. 4 Sizes. 4 1/2" to 10 1/2" long.

    Please click on the View Options button to view available sizes/options or to place an order.
    Regular Price: $ 16.49
    Our Price: $ 11.49

    Click to Configure
    Dock Edge Flip Up Dock Cleat
    Dock Edge Flip Up Dock Cleat
    Where safety is a concen this cleat folds down to a low profile base and conveniently flips up for easy use. All surfaces are smooth and rounded. Made from marine grade aluminum and white polyester powder coated. Use on small runaboats or Personal Watercraft.

    Each cleat is designed with an extra wide footprint for added strength. As strong and durable as they look, they will be attractive, functional additions to your dock.

    Available in 2 finishes:

    Cast aluminum cleats are sand blasted to give a clean grey matte finish or White Almag Aluminum Finish.

    Please click on the View Options button to view available sizes/options or to place an order.

     
    Regular Price: $ 13.39
    Our Price: $ 9.49

    Click to Configure
    Taylor Dock Floats, Polyethylene
    Taylor Dock Floats, Polyethylene

    Seamless, UV resistant black polyethylene shell filled with closed-cell foam. The tough outer shell resists impact and protects the foam core from saltwater, gasoline, and most chemicals. Thick mounting flange can be drilled to accommodate attachment fasteners for easy mounting to any dock design.

    Available in three sizes:
    # TAY 46116 24"L x 48"W x 12" H 450lbs buoyancy
    # TAY 46117 24"L x 48"W x 16" H 600lbs buoyancy
    # TAY 46118 24"L x 36"W x 12" H 355lbs buoyancy

    This item cannot be shipped internationally due to it's size.

    Please click on the View Options button to view available sizes/options or to place an order.
    Regular Price: $ 213.09
    Our Price: $ 169.95

    Click to Configure
     
    15 Items Found in DOCK EQUIPMENT Dock Building Hardware   
    .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .  
      Discount Marine Supplies is an Upfront Merchant on TheFind. Click for info.

    Discount Marine Supplies
    1061 Fairview Ave
    Wyomissing, PA 19610
    United States
    Ph: 1
    e-mail: orders@discountmarinesupplies.com;ally@discountmarinesupplies.com

     

     

    Click to view this Product
    Tie Down Dock Building Components
    Designed for use with 1 1/2" thick lumber. A full set of ha...

    Price: $ 4.95 / Each
    Add to cart Enlarge
    Click to view this Product
    Davis Portable Dock Ring
    No cleat or ring in place? Rings in the wrong place? Then us...

    Our Price: $ 15.99 / Each
    Add to cart Enlarge

    Click to view this Product
    Tie Down 26414 Roller Assembly
    Heavy duty 6" roller on a 5/8" shaft can either bolt direclt...

    Our Price: $ 56.99 / Each
    Add to cart Enlarge

    Home     |    About Us     |    Products     |    Terms     |    Privacy     |    FAQ     |    Order Status     |    Contact Us
    Copyright © Discount Marine Supplies. All Rights Reserved.

    Powered by FORTUNE3 • ecommerce solutions