 |
 |
 |
 |
|
|
|
| BEP 700 - BEP Marine Easyfit Battery Switch |
Easily removable threaded ring allows for panel thicknesses up to 19mm (3/4”). It uses the same features as the 701 with the removable key 45° past the off position, labelled handle and a removable back cover covering exposed terminals to meet ABYC specications. The switch can also be surface mounted offering a unique style compared to other switches available on the market. The 700 Easyfit can easily be retrotted in place of most European post and lever type switches.
|
Price: $ 24.95
|
|
|
|
 |
 |
 |
 |
|
|
|
|
|
|
|
|
| Cole Hersee M284 - Cole Hersee Master Disconnect Battery Switch |
Master Disconnect Switch is single pole, single throw. Protects agains electrical fires, tampering and theft. Heavy duty design for 6-12 volt and 6-36 volt applications.
Brass case and chrome plated die cast lever.
Two 3/8" diameter stud terminals.
Fits panels up to 15/16" thick.
|
Price: $ 33.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Hella 002843011 - Hella Battery Disconnect Switch |
Allow interuption of the main battery cable for effective protection against theft of your boat. Positive or negative cable can be switched off. Master battery switch is for interrupting the main battery cable for effective protection against unauthorized use of the boat. Key can be removed in OFF position. Seawater proof. Rated for 1000 amps at 12 Volts.
|
Price: $ 16.95
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| Guest 2300A - Guest Heavy Duty Battery Switch |
Heavy duty battery switch designed for diesel applications. 450 amps continuous, 800 momentary with alternator field disconnect. 4 positions: off, on 1, on 2, on 1+2. 360 continuous amps, 600 momentary amps.
Alternator field disconnect (AFD) allowing selection of any position including "off", without damage to alternator or electrical system
For 6, 12, 24 or 36 Volt systems
5-1/2" SQUARE X 3-1/2" TALL
|
Price: $ 129.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Blue Seas E Battery Switches - Blue Seas Battery Switches E Series |
Economical and versatile series of switches, 4 options to choose from. Versatile set of switches can be mounted flush or surface mounted. Accepts up to 4/0 battery cables. 350A Continuous Rating - 45% higher than standard switches
Luminous label for low light reading
Ignition protected - safe for installation aboard gasoline powered boats
Meets UL 1500 and SAE J1171 ignition protection requirements
Make-before-break contact design allows switching between battery banks
without power interruption (9001e and 9002e only)
Meets all American Boat and Yacht Council (ABYC) requirements for battery
switches
|
Price: $ 34.95
|
 |
|
|
|
|
|
|
|
| |
| |
|
|
|
|
|
|
|
| Seachoice 11501 - Seachoice 4 Position Battery Switch |
Economical choice for use with two or more batteries.
For use with two or more batteries.
For systems under 50 volts.
Permits selection between batteries for starting and charging or operation of both in parallel.
250 Amps continuous/360 Amps intermittent.
Diameter: 5-1/4". Height: 2-5/8".
|
Price: $ 34.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Seachoice 11551 - Seachoice 2 Position Battery Switch |
Economical choice for a main battery disconnect switch.
Use as a main disconnect switch
Ignition protected.
For systems under 50 volts.
250 Amps continuous/360 Amps intermittent.
Diameter: 5-1/4". Height: 2-5/8".
|
Price: $ 36.95
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| Seachoice 11531 - Seachoice Compact Battery Switch |
Ignition protected. For use with two or more batteries. For systems under 50 volts. Permits selection between batteries for starting and charging or operation of both in parallel.
315 amps continuous/450 amps intermittant
Depth is 1 7/8", Width and Height are 3 7/8"
|
Price: $ 34.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Seacoice 11561 - Seachoice Compact Battery Switch |
Ignition protected. For use with two or more batteries. For systems under 50 volts. Permits selection between batteries for starting and charging.
315 amps continuous/450 amps intermittant
Depth is 1 7/8", Width and Height are 3 7/8"
|
Price: $ 34.95
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| Blue Seas 7650 - Blue Seas Battery Switch and Solenoid Package |
Makes switching easy and automates the charging of 2 batteries. Package includes Dual Circuit battery switch and SI series automatic charge relay. A complete two battery bank management solution Dual Circuit Plus™ Battery Switch isolates engine and house circuits, and combines battery banks for emergency starting The 120 Amp SI ACR automatic charging relay combines batteries for charging.
|
Price: $ 129.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Blue Seas 7610 - Blue Seas Auto Charging Relay |
Makes switching easy and automates the charging of 2 batteries. Package includes Dual Circuit battery switch and SI series automatic charge relay. A complete two battery bank management solution Dual Circuit Plus™ Battery Switch isolates engine and house circuits, and combines battery banks for emergency starting The 120 Amp SI ACR automatic charging relay combines batteries for charging.
|
Price: $ 89.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| BEP Marine 701 - BEP Marine Master Battery Switch |
The 701 Contour Battery Master Switch offers a number of unique features. The highlights being the patented contour lock system, allowing it to be a stand alone unit, or locked together with other switches.
|
Price: $ 24.95
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| BEP Marine 701S - BEP Marine Master Battery Switch Mini Contour |
The 701-S is the most compact selector switch available on the market. Housed in the same dimensions as the 701, and includes the same removable side plates and back cover. While BEP Marine foremost recommends isolated battery systems as outlined with our distribution clusters, the 701-S offers a simple economical way of separating two batteries.
|
Price: $ 29.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| BEP Marine 720 - BEP Marine Heavy Duty Battery Switch |
It fits into the same contour lock system as used on the battery distribution system. Rated at 600 amps continuous and 2500 amps cranking. It is well suited to larger vessels.
As with the 701, the 720 can be recessed or surface mounted.
|
Price: $ 64.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| BEP Marine 721 - BEP Marine Battery Switch Contour Style #721 |
The 721 Battery Selector Switch is our heavy duty selector
switch. Housed in the same module as the 720, it includes the
same removable plates and back cover. While BEP Marine
recommends isolated battery systems as outlined with our
distribution clusters, the 721 offers a simple economical way of
separating two batteries.
|
Price: $ 44.95
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| BEP Marine 722 - BEP Marine Electric Battery Switch |
The 722 Electric Battery Switch fills a need on larger boats where cable runs are becoming excessive and as a result voltage drop is a concern. The switch is placed as close as possible to the batteries, and a short run of cable from the start batteries to the starter motor.
|
Price: $ 179.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| BEP Marine 714100A - BEP Marine Battery Selector Switch VSR |
The 714-100A uses dual sensing VSR (710-125A-DS). A welcome addition to the 701 selector switch it ensures you will always have a fully charged reserve battery. When the switch is in position 1 it becomes the sensing battery for the VSR. Battery 2 which is in isolation will be charged via the VSR when the engine is running ensuring it is always fully charged. When the switch is in battery 2 position this becomes the sensing battery and battery 1 is charged via the VSR. The fact that there is always a fully charged battery in reserve is a huge safety factor.
|
Price: $ 129.95
|
|
|
|
|
|
|
|
|
|
