The quality Imarine laminating gel coat to permanently repair or replace
original, high-glass finish. The product cures to a tacky finish for re-coating.
Evercoat Mold Release (# 105685) must be used to attain a fully cured surface.
Use to fill gouges, chips, scrapes and deep scratches in the fiberglass gel
coat. Gel Kote is a non-run, non-sag formulation of flexible polyester resins to
produce resiliency and toughness. Evercoat Coloring Agents may be used to tint
the material to desired color. Reduce with Acetone (10%) to thin for sprayer
applications.
Available in white (pint, quart, gallon) or neutral color (quart). (use
neutral color if you need to tint to obtain color)
Please click on the View Options button to view available sizes/options or to
place an order.
The highest quality marine finish gel coat to permanently repair or replace
original, high-glass finish. The product cures to a hard finish and does not
require Evercoat Mold Release to attain a fully cured surface. Use to fill
gouges, chips, scrapes and deep scratches in the fiberglass gel coat. One Step
Finish Gel Coat is a non-run, non-sag formulation of flexible polyester resins
to produce resiliency and toughness. Evercoat Coloring Agents may be used to
tint the material to desired color. Reduce with Acetone (10%) to thin for
sprayer applications.
Gel Coat is NEUTRAL in color and requires coloring agent to obtain proper
color.
Special one part gel-coat, repairs surface imperfections in less than one
hour. No sanding or hardener required. Contains 1/2 oz of patch, and application
tool. Repair fiberglass boats, bathtubs, shower stalls and hot tubs. Easy
permanent repairs on hairline cracks, small scratches and chips in fiberglass.
This one part formula does not need a catalyst. Just fill in the crack, let is
set and scrape off the excess with the enclosed spreader. It is just that easy.
Clear Scratch Patch is ideal for surface scratch repairs of metal flake
finish.
Available in 3 colors: Clear, White and Buff White
Please click on the View Options button to view available sizes/options or to
place an order.
Neutral color gel-coat paste for permanent repairs. Neatly covers all surface
imperfections. No run gel paste is easy to work with on vertical surfaces. Match
colors with coloring agents sold seperately. Hardener included.
Everything you need to repair and color match your damaged gel coat. Quickly repairs scrapes, scratches and gouges in gel coat finishes. Special no run polyester gel and release paper makes a glass hard, no-sand finish in less than one hour. Contains 2 oz resin, hardener and six blendable color additives to match any finish.
Permanently repair nicks, gouges, and scratches in fiberglass hulls and
decks. A special release film and no-run polyester gel makes a slick, no-sand
finish quick and easy. Each kit contains all primary pigment colors (6 total), 4
oz. polyester gelcoat paste, hardener, release film, mixing sticks, a blending
chart, and instructions. Mix the colors directly against hull or deck for a
perfect match. Also works well for repairing countertops, appliances, and
bathroom tubs and sinks. Cures to a glass hard finish in one hour.
A fast drying compound that is ideally suited for filling fastener holes, shallow gouges and for fairing minor imperfections in bare wood or fiberglass prior to painting.
Surfacing Putty is for use on unpainted surfaces above the waterline only. Pint can. White.
