A general purpose economy finish resin. Has excellent wettability and good strength. Can be tinted with Evercoat Coloring Agents. This resin can be used on most wood, fiberglass and some metal. Liquid hardener is included.

Available in Pints, Quarts, Gallons and 5 Gallon Pails

Please click on the View Options button to view available sizes/options or to place an order.

Quality laminating resin for base coat applications. This resin is not a finish coat. This air-inhibited resin remains tacky to hold fiberglass fabric in place on vertical surfaces. Does not require sanding between coats. Excellent for saturating fiberglass fabrics. Liquid hardener is included.

Available in Quarts or Gallons

Please click on the View Options button to view available sizes/options or to place an order.

The perfect no-run, no-sag polyester resin for marine repairs! May be used on softwoods and fiberglass. Ideal repair for hulls, decks, cabins and tanks. Repairs all boat surfaces, resists impacts and protects against moisture damage. Use with Sea-Glass fiberglass fabrics and Evercoat Coloring Agents. Liquid hardener included. 

Comes in Pint, Quart and Gallon

Please click on the View Options button to view available sizes/options or to place an order. 

An all-purpose epoxy resin for fiberglassing, molding, laminating, repairing. Use this product where superior adhesion is required. Use on aluminum, steel, fiberglass, close-grained hardwoods and Styrofoam. Easy to use 50/50 mixture. Comes complete with resin and hardener.

Available in Quarts or Gallons

Please click on the View Options button to view available sizes/options or to place an order.

Paintable epoxy sealer seeks, fills and seals cracks in fiberglass, wood, aluminum and other metals. Remains flexible with hull movements. Truly a remarkable product that every boater should have. Gluvit barrier coat seals and protects hulls and decks. Provides superior protection for fiberglass, wood, aluminum, and steel. Seals leaky seams and rivets in aluminum hulls, and leaks around fiberglass cabins or decks.Hard protective coating flexes with hull movements to bridge and seal hairline cracks.

Gluvit fills minor cracks and pinholes. Its long working time allows penetration into cracks to seal and strengthen. Acts as a barrier coat to minimize water absorption and galvanic corrosion. Deteriorated wood can be renewed with a few strokes to penetrate and strengthen stringers, decking and molding.

Expect a quart of Gluvit to cover 25-35 square feet, when applied at 6-8 mils. A gallon covers 100-130 square feet at the same thickness.

Available in Quart and Gallon Kits

Please click on the View Options button to view available sizes/options or to place an order.

A premium, high quality, high strength, vinyl ester based resin. Use where the highest possible strength achievable in a polyester is desired. Hardener Included. (5 Gallon is flammable/hazardous to ship so an extra charge is built into the product cost to cover haz-mat fees). There is NO additional charge after you place your order.

Available in Gallons and 5 Gallon Pails

Please click on the View Options button to view available sizes/options or to place an order.

Clear epoxy coating for bar tops, tabletops, plaques, etc. Dries to a high gloss finish. Mix ratio is 1 part hardener to 1 part resin. Us

Kit combines to make 1 quart.

Epoxy based glue with a high viscosity. Will not sag under normal conditions. Mix ratio is 1 part hardener to 1 part resin.

Comes in Pint, Quart and Gallon Kits.

Please click on the View Options button to view available sizes/options or to place an order.