Converters are required with all Awl-Grip Topcoats and Primers

Use the G3010 for spray applications or the H3002 for brushing applications.

Mixing Ratios By Volume:

Awl Grip reducers are required for all topside finishes whether it is Awl Grip, Awl Grip 2 or Awl Craft.

1. Awlgrip Polyester Urethane Topcoat-See Stock List for G & H color codes. Spray: Color base mixed 1:1 by volume with G3010. Reduced 20-25% with T0001,T0002 or T0003. Brush: Color base mixed 2:1 by volume with H3002. Reduced 25% to 33% with T0031.Brush or Spray:2.5-3mils(63-75microns) total dry film thickness/ 2 coats.
2. Awlcraft 2000 Acrylic Urethane Topcoat- See Stock List for F color codes. Spray: Color base mixed 2:1 by volume with G3010. Reduced 25% -33% with T0001 or T0003. 2.5-3mils(63-75microns) dry film thickness/ 2 coats.

T0001 Fast evaporating Reducer and Equipment Cleaner. Use T0001 in AWLGRIP®/AWLCRAFT® 2000  Topcoats when application and cure temperatures are between 60°F to 70°F (16°C to 21°C) and 80°F to 90°F (27°C to 32°C).

T0002 Very Fast Evaporating Reducer and Equipment Cleaner Use T0002 in AWLGRIP®/AWLCRAFT® 2000 Topcoats when application and cure temperatures are between 55°F to 65°F (13°C to 18°C) and at temperatures above 85°F (29°C).

T0003 Standard Reducer for Spray Applied Urethane Topcoats Use T0003 in AWLGRIP®/AWLCRAFT® 2000 Topcoats when application and cure temperatures are between 70°F to 85°F (21°C to 29°C).

T0005 Hot Weather Reducer for Urethane Topcoats Use T0005 in AWLGRIP®/AWLCRAFT® 2000 Topcoats when application and cure temperatures are above 85°F (29°C). T0005 is most often used as an additive, blended with other spray reducers to improve flow. T0005 is seldom the sole reducer.

T0031 Brushing Reducer to be used when brushing or rolling 545 Primer or AWL-QUIK® Primer.T0031 Brushing Reducer for Epoxy Primers and Urethane Topcoats. Use T0031 in AWLGRIP® Topcoats, 545 Primer, and AWL-QUIK® Sanding Surfacer in brush/roller applications. T0031 evaporates very slowly, keeping the paint film open, maximizing flow and leveling while minimizing brush marks and roller stipple. For AWLGRIP® Topcoats, add T0031 at 10 to 35% of the total volume of the mixed color base and converter. Application and cure temperatures between 60°F and 90°F (16°C and 32°C) produce the best results, with 70°F to 85°F (21°C to 29°C) being the optimum. T0031 is not recommended for use in spray applications. If a retarder reducer is needed for spray application, T0005 should be used.

All products are available in either quarts or gallons.

Awl Grip epoxy primers require one of the reducers listed below.

T0006 Standard Reducer for Epoxy Primer
T0006 Standard epoxy reducer for spray application of 545 Primer, AWL-QUIK®, Sprayable Fairing Compound, 30-Y-94TM, and High Build Epoxy Primer. Also used to brush or roll HULL-GARD®, for conventional spray and brush applications of HULL-GARD® W.B.

T0073 Ultra Build Reducer
T0073 Special reducer for ULTRA-BUILD® Primer (D8008-D3018).

All products are available in quarts or gallons unless specified in the product list.

Please click on the View Options button to view available options or to place an order.