AWLGRIP 545 ANTI-CORROSIVE EPOXY PRIMER: D8001(White) & D1001(Gray) A two component epoxy primer with corrosion and adhesion properties for steel, aluminum, wood, and fiberglass substrates. Also used to seal filler primers, and fairing work before applying topcoats. May be applied by spray, brush, or roller. May be used above or below the waterline.

This is a two part system. You must order the base primer in either gray or white along with the D3001 Converter in the appropriate size. The mix ratio is 1:1 so if you purchase 1 quart of primer you also need 1 quart of converter for a total of 2 quarts. Additionally you need to purchase the appropriate reducer (spray or brush) for spraying reduce up to 25% with T0006 and for brushing reduce up to 10% with T0031.

M3066 COLD CURE Accelerator for 545 Epoxy Primer
COLD CURE Accelerator for 545 Primer reduces cure and recoat times for 545 Primer by as much as 50%. Add up to 12 1/2% of catalyzed volume of 545 Primer, replacing that amount of standard reducer. Use between 50 F and 75 F This product available in pints only.

Please click on the View Options button to view available options or to place an order.

D8016 QUIK-GRIP is a fast drying primer. It is excellent for spot repairs or small parts. A white base.

You need to also buy QUIK-GRIP¨ CONVERTOR D3040 Mixing ratio is 1:1

Reduce 25% to 50% with T0001 or T0003 reducers.

D8016 and D3040 Available in Gallons only

Please click on the View Options button to view available options or to place an order.

Two part epoxy primer to be used where high build and filling is required. For most applications this is the standard epoxy primer used. For above waterline use only.

Available in Off White Base (D8002) or Yellow Base (D9002)

Mixing ratio by volume:
One part Base to one part Converter (D3002). Then reduce 10% to 20% with T0006 reducer. Sprayable only.

Available in Quarts or Gallons.

Please click on the View Options button to view available options or to place an order.

Available in Off White Base (D8008)

Mixing ratio by volume:
One part Base to one part Converter (D3018). Then reduce 5% to 25% with T0073 reducer. Spray only.

Sold in Gallons only.

Please click on the View Options button to view available options or to place an order.

Awlquik Epoxy Primer is a quick drying, epoxy primer surfacer. For above waterline use only.

345 HS Primer is a low VOC, epoxy finishing primer for use where VOC restrictions make application of 545 Epoxy Primer impractical. For above waterline use only.