The products listed below may contain additional information viewable by clicking on the item image. Products which have a button contain variables such as size or color and by clicking on the product image you will be able to view additional information as well as the options available for purchase.
Products which have a button can be added directly to your cart or you can click the image for additional product information.
This all-purpose product, with the signature "blue
ropehold" has proven itself in the most adverse conditions. Marking gear used in
heavy seas is no easy task. That's why more fishermen use Polyform A-Series than all other buoys combined.
You name it, ocean, sea, or river, and the A-Series has been there. Buoys
are shipped uninflated. Also available, is the #50 Shackle which is designed to fit
the A2, A3 and A4 buoys when used for moorings or other applications where a
buoy shackle is required.
All buoys available in Red or White
Please click on the View Options button to view available
sizes/options or to place an order.
Made from 1/2" diameter galvanized steel and 3/8"
threaded pin. The 1-1/8" plastic PVC insert helps distribute load over entire
ropehold area for maximum performance and longevity. Safe working load limit:
5000 lbs. (use of this product with anything other than Polyform buoys in
a mooring situation is not recommended)
Tuff End fender ends are made from injection molded
vinyl tested to 2000 psi tensile strength. Features large line holes that will
accept standard shackles.
The curved design hole prevents chafing.
Available in several diameters from 9" to 27: and colors white or
orange.
Cal June Premium Mark V bouys are made from the toughest plastics available
today. Rock hard outer shell with high density polyurethane foam interior. 2"
blue band around buoy. Center hole design.
Please click on
the View Options button to view available sizes/options or to place an
order.
White with blue stripe. Features high density foam whjich assures lasting
durability. All hardware is hot-dipped galvanized medium carbon steel. Eye bolts
are molded into buoy, resolting in no flotation loss. Buoy is coated with CJ-19
an exterior coating that resists extreme weathering, most chemicals and fuels.
12" diameter; hardware is 1/2" wire diameter. 30 lbs
bouyancy.
Sur-Moor hard skin mooring buoys have a seamless and tough, one-piece
polyethylene shell. Hard skin shells feature ultraviolet light absorbers for
long-term life under the sun. Filled with EPS foam to positively displace water.
Hot dipped galvanized steel rod. Blue stripe is reflective for nighttime
visibility.
Please click on the View Options button to view available sizes/options
or to place an order.
Sur-Moor hard skin mooring buoys have a seamless and tough, one-piece
polyethylene shell. Hard skin shells feature ultraviolet light absorbers for
long-term life under the sun. Filled with EPS foam to positively displace water.
Thru-tube center design.
T3CT Mooring Collar
Hot-dip galvanized steel collar protects your T3C buoy from anchor chain
wear, prolonging the life of the buoy. Designed to work in combination with
standard shackles. Mooring collars are sized to slip into the top of 2" or
2-1/2" tube diameters.
Please
click on the View Options button to view available sizes/options or to place an
order.
This multi-use rugged float can be used as a pick-up buoy, marker buoy, or fender. Makes a great marker for water ski events and can be used as a fender for personal watercraft. Available in white or high visibility fluorescent colors. Taylor's unique double color system incorporates a "backup" color that resists fading. Taylor fluorescents will retain their color long after the competition's has faded away. 8" diameter.
The Sur-Moor taper shape design places more floatation area at the waterline
creating a higher visibility mooring. The hard-skin polyethylene shall is UV
protected to resist the weathering effects of sunlight and is foam filled to
positively displace water. Available in the Tube-Through-The-Center design with
blue reflective striping.
Please click on the
View Options button to view available sizes/options or to place an
order.
The rope nest design has a built in cup shape at the top of the buoy that
allows the anchor shackle to nest below the buoy surface. This recessed area
helps shield the shackle from contacting the boat hull while making a convenient
nesting place for the pennant line when the boat departs from the mooring. The
hard-skin polyethylene shell is UV protected to resist the weathering effects of
sunlight and is foam filled to positively displace water. Sandblasted finish.
Tube Through-The-Center design with blue reflective striping. Hardware not
included.
Buoy is 18" diameter, with 2 1/2" center tube and 100 lbs of
bouyancy.
Everything about The Spoiler is carefully designed to give fishing operations optimal
buoy performance over the long haul.
The Spoilers unique, more rounded shape produces greater bouyancy and lower
drag when compared to traditional buoys. Ribbed design also helps keep drag to
an absolute minimum.
Available in 2 sizes:
10 1/2" diameter x 18" length with 37 lbs of bouyancy
13" diameter x 24" length with 84 lbs of bouyancy
Colors: Orange, Neon Red, Rocket Red, Yellow, Green, White, Black, Blue and
Blaze Orange.
A long tapered buoy used in place of a standard round
mooring buoy during the winter months. The Sully Stick has a molded in eyelet at
the top for easy retrieval. The base eyelet is reinforced with a galvanized
metal bushing to attach a rope and connect to the anchor chain. The shape of the
Sully stick helps it escape ice entrapment better than a round buoy and can
extend the useful life of a mooring buoy by protecting it from
the damaging effects of freezing temperatures.
The 5/16" fiberglass mast is coated with a PVC outer layer for strength,
flexibility and elimination of fiberglass shards. The urethane foam filled HDPE
outer shell provides great flotation and years of service. The cast weight is
also covered with HDPE so it will not scratch or mar your boat's finish.
Available in 2 lengths: 48" and 74". Buoyancy is 6 lbs.
Taylor regulatory buoys are molded from tough UV protected polyethylene.
One-piece seamless construction, internal concrete ballast, recessed galvanized
eye; both styles stand upright for storage.
Exclusive high performance design, stability, high visibility and 3 year
limited warranty. Self-righting, internal ballast allows buoy to right itself
without requiring additional ballast. Marks swim areas, no wake zones, hazards
and other dangers.
Color labels are sold separately and fit both styles of
buoys. Labels are sold in pairs.
Available Labels (2 per pack)
SLOW 5 MPH
SLOW NO WAKE
SWIM AREA
Please click on the View Options button to view available sizes/options
or to place an order.
button contain variables such as size or color and by clicking on the product image you will be able to view additional information as well as the options available for purchase. 
button can be added directly to your cart or you can click the image for additional product information. 
