Polished, chrome-plated bronze chocks hold small, pivoting fluke anchors. Fit Danforth anchors to 16lb. and Fortress Anchors to 10lb. (FX-16). Four-piece set includes supports for shank, flukes and crown.

Available in 2 sizes:
Size 1: Fluke style anchors up to 15 lbs.
Size 2: Fluke style anchors over 15 lbs.

Please click on the View Options button to view available sizes/options or to place an order.

Heavy duty stainless steel anchor tensioner that holds the anchor securely to the anchor roller to prevent rattle. Locks in place yet allows quick-easy release for safety.

Designed for anchors up to 90 lbs.

Size is 4 1/2" L x 1 1/2"W

The ANCHOR MASTER allows a boater to easily and safely retrieve the anchor. This product eliminates all the hard work pulling up an anchor and all the pain to the back and hands from doing that work. It also eliminates the danger of falling overboard while pulling that heavy load.

To retrieve your anchor with the ANCHOR MASTER:
1) Slip the ring around your anchor line and fasten the ring ends into the cliphook which is attached to the rope and buoy.
2) Drop the ANCHOR MASTER into the water and motor towards the anchor.
3) Run past the anchor at the speed of 6-8 knots. The buoy will mostly submerge until the buoyancy of the buoy raises the anchor.
4) When the anchor is fully raised into the ring, the buoy will pop to the surface. The ring will hold the anchor at the surface.
5) Slowly return to the buoy while you are retrieving the loose rope.
6) Carefully lift the buoy and anchor into your boat.

Please click on the View Options button to view available sizes/options or to place an order.

Stainless steel medium fairlead anchor roller. For boats 20`-45` with pivoting fluke anchors. Guide lines up to 1" diameter and up to 3/8" chain. Captive ball-lock pin holds line or chain securely in the channel.

9" long
Wheel size: 1 3/4" x 1 1/2"
Max Rope size is 1" diameter

• Friction-free surface to make dropping and weighing anchor easier
• Wont damage the deck or topsides
• Allows you to safely stow anchor while cruising and deploy at short notice
• Constructed of 304 stainless steel
• Range of rollers to fit the most common combinations of anchor, mounting style and boat

Available in 2 variations:

For Fluke Anchors up to 35 lbs: 20"L x 3 1/8"W

For Delta Anchors 14, 22 and 35 lbs. 23 11/16"L x 3 1/8"W

Please click on the View Options button to view available sizes/options or to place an order.

A high strength (2000 lbs) lightweight stainless steel roller to easily raise and lower the anchor without damaging the hull or topsides. The marithane wheel has a lifetime warranty.

For boats 20' - 30' with anchors up to 35 lbs.
Handles line up to 1" dia. and chain up to 3/8"
Easily raises and lowers the anchor without damaging the hull or topsides
6 1/4" Long X 2" Wide

A long reach heavy gauge stainless steel roller to help prevent damage to the hull or the deck while anchoring. Also increases leverage to reduce the work. A ball-lock pin keeps chain up to 3/8" and line to 1" diameter within the channel. Marithane wheel.

A long-reach anchor roller for anchors up to 60 lbs.
Handles line up to 1" dia. and chain up to 3/8"
Easily raises and lowers the anchor without damaging the hull or topsides
11" Long X 2 1/8" Wide

Easily mounted on platform. Designed for anchors up to 20lbs. Durable stainless steel. Helps prevent dings and scratches to your boat's finish.
Reduces the work required to raise and lower anchors. Keeps your anchor farther away from your boat's finish

Provides a strong, dependable and protective point of contact for the anchor rode when you're at anchor. Special Marithane wheels are more durable, yet quieter, than either hard plastic or metal.

Product Specifications:
For boats 18' - 30' with anchor platforms or bow planks and pivoting fluke anchors
Handles line up to 1/2" dia. and chain up to 3/8"
Mounts in or under slot to hold anchor under bow plank

Wide channel accomodates anchor shackles. Designed for anchors 20 to 50 lbs. Helps prevent dings and scratches to your boat's finish.

Reduces the work required to raise and lower anchors. Keeps your anchor farther away from your boat's finish. Provides a strong, dependable and protective point of contact for the anchor rode when you're at anchor. Special Marithane wheels are more durable, yet quieter, than either hard plastic or metal

Product Specifications:
For boats 28' - 48' with anchor platforms or bow planks and pivoting fluke anchors
Handles line up to 1-1/2" dia. and chain up to 1/2"
Mounts in or under slot to hold anchor under bow plank

Desinged for large platforms on boats 35' to 75'. Accomodates the largest anchors. Helps prevent dings and scratches to your boat's finish.

Reduces the work required to raise and lower anchors. Keeps your anchor farther away from your boat's finish. Provides a strong, dependable and protective point of contact for the anchor rode when you're at anchor. Special Marithane wheels are more durable, yet quieter, than either hard plastic or metal.

Product Specifications:
For boats 35' - 75' with anchor platforms or bow planks and pivoting fluke anchors
Handles line up to 1-1/2" dia. and chain up to 1/2"
Mounts in or under slot to hold anchor under bow plank

Designed for boats 20' to 45'. Stainless steel. Guides anchor line up to 1" in diameter and chain up to 3/8". Will protect the hull and make anchoring much easier and safer. Made for heavy duty use. A captive ball-lock pin holds the line or chain securely in the channel. Marithane wheel, chafe free design.

Stainless steel. Guides anchor line up to 1" in diameter and chain up to 3/8". Will protect the hull and make anchoring much easier and safer. Made for heavy duty use. A captive ball-lock pin holds the line or chain securely in the channel. Marithane wheel, chafe free design.

Product Specifications:
For boats 20' - 45' with pivoting fluke anchors
Guides line up to 1" dia. and chain up to 3/8"
Captive ball-lock pin holds line or chain securely in the channel
9" Long X 2" Wide

Securely stow plow anchors safely and easily. Fits 20 to 60 lb plow anchors. Designed for 25' to 75' boats.

Reduces the work required to raise and lower anchors. Keeps your anchor farther away from your boat's finish. Provides a strong, dependable and protective point of contact for the anchor rode when you're at anchor. Special Marithane wheels are more durable, yet quieter, than either hard plastic or metal.

Product Specifications:
For boats 25' - 75'
Securely stows plow-type anchors 20 lbs. - 60 lbs.
Stainless bail holds line up to 1-1/2" dia. and chain up to 1/2" within wide channel
27" Long, 3 7/8" Wide, 6" High

Fits all Danforth Style and Deepset anchors on pulpit or rail. Unique adjustable clips grip anchor securely. Quick release for emergencies. Anchors up to 35 lbs are held away from rail, with flukes downward to prevent snagged lines.

Patented design stows Danforth® and Fortress® type anchors
Mounts on both 7/8" and 1" rails or pulpit with flukes downward to prevent snagged lines
Grips anchor securely, yet allows for quick release

Fits all Danforth Style and Deepset anchors on any vertical stanchion. Unique adjustable clips grip anchor securely. Quick release for emergencies. Anchors up to 35 lbs are held away from rail, with flukes downward to prevent snagged lines.

Patented design stows Danforth® and Fortress® type anchors
Mounts securely to any 7/8" or 1" vertical stanchion
Grips anchor securely, yet allows for quick release
All stainless steel

Accomodates all common anchor types including plow (CQR), Delta, Fluke (Danforth) and others. Designed for anchors 25 to 45 lbs.

Reduces the work required to raise and lower anchors. Keeps your anchor farther away from your boat's finish. Provides a strong, dependable and protective point of contact for the anchor rode when you're at anchor. Special Marithane wheels are more durable, yet quieter, than either hard plastic or metal.

Product Description:
Handles and stows plow, Danforth®, Fortress® and Delta® type anchors
For boats 25' - 54'

Designed for holding fluke and Fortress (up to FX 23) on sail or powerboats. Reduces the work required to raise and lower anchors. Keeps the anchor away from your boats finish.

Provides a strong, dependable and protective point of contact for the anchor rode when you're at anchor. Special Marithane wheels are more durable, yet quieter, than either hard plastic or metal.

Product Specifications:
For Fortress® anchors through FX-23 and Danforth® to 13 lbs.
Bail holds line up to 1" diameter and chain up to 3/8"
Flared mounting tips help eliminate chafe
16" Long X 3 1/2" Wide X 2 1/2" High

Designed for most anchor types including plow and Delta. Best suited for anchors 12 to 60 lbs. Reduces the work required to raise and lower anchors. Keeps your anchor farther away from your boat's finish.

Provides a strong, dependable and protective point of contact for the anchor rode when you're at anchor. Special Marithane wheels are more durable, yet quieter, than either hard plastic or metal.

Product Specifications:
For Danforth®, Fortress® and Delta® type anchors
For boats 25' - 54'
Bail holds line up to 1 1/2" dia. and chain up to 1/2" within the wide channel
Low-profile design
26" Long X 5 1/2" Wide X 6" High

Designed to hold fluke, Delta and Fortress anchors 13 to 28 lbs.. Ideal when deck space is limited. Reduces the work required to raise and lower anchors. Keeps your anchor farther away from your boat's finish.

Provides a strong, dependable and protective point of contact for the anchor rode when you're at anchor. Special Marithane wheels are more durable, yet quieter, than either hard plastic or metal.

Product Specificatios:
For Danforth®, Fortress® and Delta® type anchors
For boats to 35'
Ideal for mounting anchors where there is limited deck space
Heavy-duty construction
19" Long X 5" Wide X 6" High